Under-Bed Storage with a Useful Headboard Shelf
The Phoenix Gas Lift Bed uses the space beneath the mattress for storage while keeping small bedside items organised within the headboard. Its dark timber-look frame surrounds a broad upholstered headboard panel, with an integrated shelf, charging point and light close to the sleeping area.
The mattress platform lifts from the foot end to reveal divided under-bed storage. This arrangement is useful for spare bedding and larger household items that do not need to be accessed every day. The shelf and light add day-to-day convenience without requiring a separate unit directly behind the bed.
Key Features
- Gas-lift mattress platform with under-bed storage
- Divided storage area beneath the platform
- Storage headboard with integrated lighting
- Built-in charging point
- Dark timber-look frame with a broad upholstered headboard panel
- Available in King, Queen, Double and King Single
How the Gas-Lift Storage Works
The mattress platform raises from the foot end, assisted by gas-lift hardware. The fitted mattress contributes to the balance of the mechanism, so its size and weight must be suitable. Use the designated handle, keep the movement controlled and do not reach into the storage area until the platform is fully supported in the open position.
Store items below the platform height and clear of hinges, support arms and closing points. The headboard light and charging point require a suitable power connection, so plan the bed position around an accessible outlet and avoid trapping cables behind the frame.
Product Details
| Product type |
Gas-lift storage bed frame with storage headboard |
| Available sizes |
King, Queen, Double and King Single |
| Headboard features |
Storage shelf, integrated light and charging point |
| Bed-frame height |
Approximately 34 cm, all sizes |
| Headboard height |
Approximately 128 cm, all sizes |
| Headboard overhang |
Extends about 3 cm beyond the bed frame on each side |
| Approximate gross weight |
King 156.5 kg; Queen 131 kg; Double 119 kg; King Single 103 kg. Component and packaged weights should be confirmed before delivery. |
| Bed-frame warranty |
12-month minimum on bed frames, manufacturer warranty confirmed at purchase. |
Dimensions and gross weights are approximate and may vary slightly between production batches and packaging. Please confirm product measurements, packaged weights and delivery-access requirements with your nearest Beds4U store before ordering.
Size Guide
| Size |
Bed width |
Bed length |
Fits mattress |
| King Single |
118 cm |
228 cm |
107 × 203 cm |
| Double |
149 cm |
213 cm |
138 × 188 cm |
| Queen |
164 cm |
228 cm |
153 × 203 cm |
| King |
194 cm |
228 cm |
183 × 203 cm |
Bed width is measured across the headboard, which is the widest point. Bed-frame height and headboard height are the same across all four sizes. Mattress dimensions are the Australian standard sizes; individual mattresses vary by around a centimetre between manufacturers.
Before You Buy
- Note the length: at 228 cm the Queen and King are longer than a standard bed base, so allow the extra room.
- Confirm that your mattress is suitable for the lift mechanism.
- Allow safe clearance above the mattress when the platform is raised.
- Plan access to a power outlet for the headboard light and charging point.
- Check packaged sizes and weights against doorways, stairs and tight turns.
- Ask what is included with the frame and whether assembly can be arranged.
Try It at Beds4U
Visit Beds4U to raise and lower the Phoenix platform, inspect the divided storage, operate the headboard light and charging point, and confirm the mattress requirements and measurements.
Display models vary by store — contact your nearest Beds4U showroom before travelling to confirm the Phoenix Gas Lift Bed is on the floor.
